Filter
Top Products
Getting Started Network
function
Troubleshooting Specifications
PC
Application
Operation
LCD button
1
To use to operate an AV amplier (AV
receiver), press [Denon1].
b [Denon2] is a function for system expansion in the future.
Normally select [Denon1].
2
Press [YES].
3
Press NEXT.
After “PLEASE WAIT” is displayed, the default device
is set to [Denon1].
4
Press DEVICE.
The initial settings screen appears.
Introduction
Operation of the LCD buttons
When buttons on the remote control unit are pressed, various
settings and operation items appear on the LCD screen.
LCD button
When batteries are loaded for the first time
Make the setting described below.
Initial display screen
The initial display settings are shown on the display below.
When using the RF two-way communication
function
Change the amplifier setting to “RF” at “Setting the remote
control code transmission mode (In the case of RF)“ (vpage
15).
n Operation for selecting
• Press the LCD button to the left or right of the displayed
item name to select it.
• The screen is displayed for 5 seconds. Operate while the
screen is displayed. (“Setting the screen display time”
(vpage 5))
• When “
PAGE” is displayed at the bottom of the screen,
there are one or more other pages in addition to the one
currently displayed. Use the NEXT and BACK button to
switch screens.
BACK button
n Indication of item names in this manual
In this manual, the names of items displayed on the screen
are indicated [ ]. (Example: [Denon1])
GScreen 1H GScreen 2H
DEVICE SELECT
AMP ZONE2
ZONE3 ZONE4
TUNER CD
DVD TV
SAT
Cable
Page 1/2
DEVICE SELECT
VCR 1 iPod
VCR 2 NetAud
DTU
Page 2/2
Operation
NEXT button
DEVICE button
NOTE
A DENON product compatible with the RC-7001RCI (sold
separately) is required to use this function.
When the LCD screen in the display on screen 1 goes off,
press the RC SETUP button for 3 seconds to resume the original
screen.
Please select
which type of
Denon product
you are using
below.
Denon 1 Denon 2
1
You have selected
Denon 1
Are you
sure you
want to set up
Denon1?
NO YES
2
This process
will take a few
moments to
complete. Press
NEXT to begin
Setting up your
Denon1 remote.
PLEASE WAIT
3
Denon1 has been set
succesfully!
Press NEXT to
continue with
more setup
choices or DEVICE
to begin using
your remote.
4
Initial setting
TV Hitachi
SAT RCA
Cable Motrola
VCR-1 Hitachi
VCR-2 SONY
Others DENON