Filter
Top Products
Getting Started Operation Troubleshooting Specifications
PC
Application
NEXT
RC SETUP
LCD
LCD
Operations using nodes
Adding nodes (1)
Use this procedure to register a node number and add an
RC-7001RCI (sold separately) to the network.
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press NEXT twice, then press [NETWORK].
3
Press [ADD NODES].
4
Press NEXT.
5
To add the remote control unit to the
network, press [REMOTE].
6
Press RESET/CONFIG on the RC-7001RCI
(sold separately) for about 1 second.
The indicator flashes green.
7
Press NEXT twice.
“Success!” is displayed when the device has been
added successfully.
b Press NEXT to return to the settings menu.
Network
function
LCD buttonLCD button
About the button names in these explanations
[ ] : LCD buttons for selection items
Button name only:
Indicates a button on the remote control unit
Adding nodes (2)
Use this procedure to add a second or more units of the
RC-70001CI (sold separately) to the network.
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press NEXT twice, then press [NETWORK].
3
Press [ADD NODES].
4
Press NEXT.
5
To add the RC-7001RCI to the network,
press [OTHER].
6
Press RESET/CONFIG on the RC-7001RCI
(sold separately) for about 1 second.
The indicator flashes red.
7
Press NEXT twice.
“Success!” is displayed when the device has been
added successfully.
b Press NEXT to return to the settings menu.
Press RESET/CONFIG on the RC-7001RCI (sold separately) for at
least 10 seconds so that the indicator lights red.