Filter
Top Products
Getting Started Network
function
Troubleshooting Specifications
PC
Application
8
Use 1, 2, 3, 6, 7, 8, 9,
VOL+ – to check whether the device to be
added operates.
Operates ........................................ [YES]
• The IR/RF selection screen appears.
Does not operate ........................... [NO]
• The screen switches to the next code. Find the code
that operates and set it by pressing [YES].
9
Press [IR] or [RF] to select the remote control
signal.
[IR] :
Infrared signals are transmitted.
[RF] :
Send RF signals to the RC-7001RCI remote control receiver
(sold separately).
b For details on the RC-7001RCI (sold separately), see
“Network function” (vpage 22).
10
At the “Select Position” screen, press the
LCD button for the posision at which you
want to add the preset device.
The setting is entered.
b Press [NO] to end, [YES] to continue.
NOTE
Depending on the product’s year of manufacture and
differences in functions from model to model, there may be
some buttons that do not operate or buttons that operate
erroneously.
Using the learning function
This function lets you register the desired remote
signals of devices by sending them to the remote
control unit.
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press [LEARNING].
3
Press [LEARN KEY].
4
Press NEXT twice.
5
At the “Select Device” screen, press the LCD
button for the device whose remote control
signals you want to register.
6
At the “Learn Key” screen, press the LCD
button for the operation button name you
want to register.
b Signals can be “learned” at buttons other than RC SETUP,
NEXT, BACK and DEVICE.
Various settings
Using the preset memory function
The remote control unit can be preset to operate devices
of various brands.
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press [BASIC SETUP].
3
Press [BRAND SET].
4
Press NEXT.
5
At the “Press Device Type” screen, press
the LCD button for the device you want to
set in the preset memory.
6
Press NEXT.
7
At the “Select Brand” screen, press the LCD
button for the device’s brand name.
b If the brand you want to choose is not displayed, press
NEXT to switch the brand display.
b If there are multiple codes, “1 of
z
” is displayed.
(
z
is the number of codes)
Operation