Filter
Top Products
Getting Started Network
function
Troubleshooting Specifications
PC
Application
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press NEXT, then press [EDIT FUNC].
3
Press NEXT, then press [ADD FUNC].
4
Press NEXT.
5
At the “Source Device” screen, press the
LCD button for the device (equipment) you
want to add.
6
Press NEXT.
7
At the “ADD IR” screen, press the LCD
button for the function of the button you
want to add.
8
Press NEXT.
9
At the “Select key” screen, press the LCD
button for the position of the button you
want to add.
10
Press [TEST KEY], and if the operation has
been performed press [YES].
b Press [YES] to add more buttons.
Adding buttons
When new buttons are added, it is possible to select and add
new functions.
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press NEXT, then press [EDIT FUNC].
3
Press [DISPLAY MODE].
4
Press NEXT.
5
At the “Select Device” screen, press the LCD
button for the device of the button whose
display mode you want to change.
6
At the “Select key” screen, press the LCD
button for the button whose display mode
you want to change.
7
Press [COLUMN MODE] or [ROW MODE].
[COLUMN MODE] :
The buttons are displayed two per row.
[ROW MODE] :
The buttons are displayed one per row.
8
Press [YES].
The display mode is set.
b When [NO] is pressed, the setting menu reappears. To
continue, press [YES].
Setting the button display mode
Use this procedure to select the way in which the buttons are
displayed.
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press NEXT, then press [EDIT FUNC].
3
Press [ERASE].
4
Press NEXT.
5
At the “Source Device” screen, press the
LCD button for the device of the button you
want to delete.
6
At the “Select key” screen, press the LCD
button for the button you want to delete.
7
Press [LEAVE EMPYT] or [SHIFT ALL UP].
[LEAVE EMPTY] :
The button is deleted.
[SHIFT ALL UP] :
The button is deleted and the other buttons are all shifted up,
filling in the space of the deleted button.
8
Press [YES].
The button is deleted.
b When [NO] is pressed, the setting menu reappears. To
continue, press [YES].
Deleting buttons
Operation