Filter
Top Products
Getting Started Operation Network
function
Troubleshooting Specifications
NOTE
• During data upload or download using “RC-7000CI Editor”
do not carry out the following operations. Failure of the main
unit and personal computer may result.
• Remove the USB cable.
• Switch off the personal computer power.
• Remove batteries from main unit.
First connect the RC-7000CI to the personal computer using
the USB cable provided.
Use a computer connected to the Internet.
1
Load the CD-ROM (RC-7000CI Editor) in
the CD-ROM drive.
2
Run “RC-7000CI Editor.exe”
b Follow the installation instructions on the installation
wizard screen.
b After installation, the “Installation complete” dialog
message is displayed.
3
Press “Finish” to nish installation, and
start the application.
1
When using the application for the rst
time, check the New User box, enter e-mail
address, password, etc., and press OK.
2
Run “RC-7000CI Editor.exe” from the CD-
ROM drive in My Computer.
“RC-7000CI Editor” starts up.
3
Follow the wizard instructions.
PC Application
RC-7000CI Editor function
n You can use “RC-7000CI Editor” for the
following operations.
• Editing RC-7000CI setting data.
• Backing up RC-7000CI setting data on the PC.
• Remote control code database downloading.
n Recommended devices and environment
required for using “RC-7000CI Editor”.
• Personal computer running Windows
®
XP Service Pack2
operating system.
• HDD with sufficient free disk space.
• USB 2.0 connection terminal.
• Internet connection environment
RC-7000CI Editor installation Using RC-7000CI Editor
PC
Application