Filter
Top Products
Getting Started Operation Troubleshooting Specifications
PC
Application
Setting the receiver display mode
(RDM)
This setting is made for conducting two-way
communications between the RC-7001RCI (sold
separately) and compatible DENON products. The status
information of the compatible DENON product can be
displayed on the set's screen. Use this procedure to set
the RDM page display position.
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press NEXT twice, then press [USER
PREF].
3
Press [RDM].
4
Press NEXT.
5
Press [YES].
6
Use [FIRST] and [LAST] to set the position
at which you want the RDM page to be
displayed.
[FIRST] :
The RDM page is displayed at the beginning of the normal
button screen.
[LAST] :
The RDM page is displayed at the end.
b Press NEXT to return to the settings menu.
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press NEXT twice, then press [USER
PREF].
3
Press [VERSION INFO].
The LCD button version information is displayed.
b Press NEXT twice to return to the settings menu.
Checking the remote control unit version
Network
function
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press NEXT twice, then press [NETWORK].
3
Press [EDIT LABEL].
4
Press NEXT twice.
The RC-7001RCI’s (sold separately) node number is
displayed.
5
Select the node number to be changed, then
press NEXT.
The edit screen for the selected node appears.
6
At the “Edit Text” screen, use the rst
column of LCD buttons to select the position
of the character to be edited.
7
Select the character to be input with the
second column of LCD buttons, then press
[SELECT].
b Lower case letters are input when [CAPS] is displayed,
capital letters when [lower] is displayed.
8
Press [SAVE].
9
Press NEXT.
b When [NO] is pressed, the setting menu reappears. To
continue, press [YES].
Changing node labels
Use this procedure to add labels to RC-7001RCIs (sold
separately) for easier distinction.