Filter
Top Products
Getting Started Network
function
Troubleshooting Specifications
PC
Application
NEXT
RC SETUP
LCD
LCD
Deleting signals registered with the
learning function
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press [LEARNING].
3
Press [ERASE LEARN].
4
Press NEXT twice.
5
At the “Source Device” screen, press the
LCD button for the device you want to
delete.
6
At the “Select Key” screen, press the button
for the learning function you want to erase.
7
To delete, press [YES].
If you do not want to delete, press [NO].
b Press [NO] to end, [YES] to continue.
Changing the button name
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press NEXT, then press [EDIT TEXT].
3
Press [KEY NAME].
4
At the “Select Device” screen, press the LCD
button for the device whose button name
you want to change.
5
At the “Select key” screen, select the LCD
button for the button whose button name
you want to change.
6
Press NEXT.
7
At the “Edit Text” screen, use the rst
column of LCD buttons to select the position
of the character to be edited.
8
Select the character to be input with the
second column of LCD buttons, then press
[SELECT].
b Lower case letters are input when [CAPS] is displayed,
capital letters when [lower] is displayed.
Up to 12 characters can be input.
9
Press [SAVE].
b When [NO] is pressed, the setting menu reappears. To
continue, press [YES].
Operation
LCD buttonLCD button
About the button names in these explanations
[ ] : LCD buttons for selection items
Button name only:
Indicates a button on the remote control unit