Filter
Top Products
Getting Started Network
function
Troubleshooting Specifications
PC
Application
NEXT
RC SETUP
LCD
LCD
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press NEXT, then press [EDIT DEVICE].
3
Press NEXT.
4
Press [IR/RF].
5
Press NEXT.
6
At the “Select Device” screen, press the LCD
button for the device whose transmission
mode you want to change.
7
Press NEXT.
8
Press [IR].
[IR] :
The codes are sent as infrared signals.
9
Press [YES].
The transmission mode is set.
b When [NO] is pressed, the setting menu reappears. To
continue, press [YES].
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press NEXT, then press [EDIT DEVICE].
3
Press [DISPLAY MODE].
4
Press NEXT.
5
At the “Select Device” screen, press the LCD
button for the device whose display mode
you want to change.
6
Press [COLUMN MODE] or [ROW MODE].
[COLUMN MODE] :
The devices are displayed two per row.
[ROW MODE] :
The devices are displayed one per row.
7
Press [YES].
The display mode is set.
b When [NO] is pressed, the setting menu reappears. To
continue, press [YES].
Setting the device display mode
Use this procedure to select the way in which the devices
(equipment) are displayed.
Setting the remote control code transmission
mode (In the case of IR)
Operation
LCD buttonLCD button
About the button names in these explanations
[ ] : LCD buttons for selection items
Button name only:
Indicates a button on the remote control unit
NOTE
The display mode is not set in the device. Set with respect to
the LCD button position.