Filter
Top Products
25
CFA3000 MANUAL SECTION 3
INSTRUMENT DESCRIPTION
Place the clear grab sample inlet tube into a beaker containing the grab sample.
2. Press one time. The display shows flashing dashes, “ “ .
The system analyzes the grab sample and after 15 minutes, displays the results when complete (The results
are “flashed” on the display).
Grab Sample Display: 10.0 (flashing for three minutes)
After the display of the grab sample’s value, a multistream analyzer begins processing the next stream in sequence.
3. To display measurement for previous grab sample, press twice.
4. Press button to return to normal operation.
3.6 Manually Sample a Particular Stream.
Use this procedure to manually switch between sample streams in a multistream system. This operation can be
performed at any time, except during calibration.
Press one time. Sample Display: 0 0 0 1 .
Press and to change stream number. Sample Display: 0 0 0 3
Press to start sampling desired stream.
Press to return to multistream automatic analysis.
3.7 Shutdown
To shut down the CFA3000 for only a few days, press main Power button in back of upper cabinet to OFF
position. Leave reagent straws in reagent containers.