Filter
Top Products
2
CFA3000 ISE Analyzer
Instruction Manual
1.1 Thoroughly Read This Manual
This instruction manual describes installation, operation, and maintenance of the CFA3000 ISE Analyzer. To
ensure continued operation to the design specifications, personnel should read this manual thoroughly before
proceeding with installation, operation, or maintenance of the analyzer.
• Ensure that you have received the correct model and options from your purchase order. Verify that this
manual covers your model and options. If not, call: 18008548257 or 9497578500 to request the correct
manual.
• For any inquiries about your analyzer, contact your Rosemount Analytical representative.
• Failure to follow the documented instructions may cause any one of the following situations to occur: damage
to this instrument and warranty invalidation.
• Follow all warnings, cautions, and instructions supplied with the product.
• Only qualified personnel should install, operate, update, program, and maintain the product.
• All personnel must learn proper installation, operation, and maintenance of the product.
• Install, operate, and maintain equipment exactly as specified in this manual.
• Follow appropriate local and national codes.
• Only connect the analyzer to electrical sources specified in this manual.
• Use only components supplied by Rosemount Analytical or recommended by them for replacement.
Tampering or unauthorized substitution of parts and procedures may affect the performance of the analyzer
as well as void the warranty.
• All protective covers must be in place and cabinet panels must be closed at all times after installation or
maintenance.
1.2 Analyzer Benefits
Rosemount Analytical listened to you and decided to move away from a peristaltic pump assembly requiring
monthly replacement of the pump tubing. The new pump assembly has a vacuum/pressure valve system which
eliminates pump tubing and used significantly less reagent. Since the new valve pump swiftly moves fluids through
the analyzer, the potential for clogging within any internal component is reduced. Significantly. As a result, mainte
nance is required less frequently and procedures such as cleaning flow cells and the mixing system are no longer
required.
The upgraded software now identifies a fixed standard that allows one to change the range of the 05 V and the
420 mA output signals to your requirements.