Filter
Top Products
4
CHAPTER 1 PRODUCT HANDLING AND SPECIFICATIONS
Figure 1.2-2 Front view of the emulator unit
Figure 1.2-3 Rear view of the emulator unit
No. Name Description
(1) TRIG terminal Used to input external trigger signals.
(2) EMUL terminal Outputs a program execution signal.
No. Name Description
(1) RESET switch Resets the emulator.
(2) POWER switch Turns on the emulator.
(3) DC inlet Connects to the AC adapter provided as an accessory.
(4) USB connector Connects to a USB cable.
(5) RS-232C connector Connects to an RS-232C cable.
(6) TEST terminal Connects to a cable used for product testing. Do not use this terminal.
(7) LAN connector Connects to a LAN cable.
(1)
TRIG EMUL
(2)
(1)
LAN
RESET
DC IN
POWER
SERIAL
(2) (3) (4) (5) (6) (7)