Filter
Top Products
13
1.10 Options
1.10 Options
A variety of options are available for the emulator. Purchase options separately as
necessary.
■ Options
The emulator unit cannot be used independently. Table 1.10-1 "Options" lists options for the
emulator. As required, purchase options to build an emulator system suitable for the evaluation
MCU used.
Table 1.10-1 Options
Name Model name
Evaluation MCU
(*1)
MB90Vxxx
Adapter board
(*2)
MB2147-xx
Probe cable
(*3)
MB2132-xxx
Probe header\
(*3)
MB2147-xxx
RS-232C cable
(*4)(*5)
-
USB cable
(*4)
-
LAN cable
(*4)
-
BNC cable
(*6)
-
*1: The model name depends on the evaluation MCU used. For more information, contact the
Fujitsu Sales Dept. or Support Dept.
*2: The adapter board is an interface board that connects the user system to the emulator
unit.
Purchase an adapter board that is compatible with the evaluation MCU used. Contact the
Fujitsu Sales Dept. or Support Dept. for information on selecting a suitable adapter board.
For information on how to handle and use an adapter board, and for related safety
precautions, see the Adapter Board Hardware Manual.
*3: The probe cable is an FPC cable that connects the user system to the emulator.
The probe header is a board that uses a flat cable to connect the user system to the
emulator.
Purchase a probe cable and header that are compatible with package of the regular-
production MCU being used. Contact the Fujitsu Sales Dept. or Support Dept. for
information on how to select a suitable probe cable and probe header.
For information on how to handle and use a probe cable and probe header, and for
related safety precautions, see the respective operation manuals.
*4: Use an RS-232C, USB, or LAN cable for the communication interface. Prepare a cable
that is compatible with both the emulator and the host machine used.
*5: Prepare an RS-232C cable by selecting a cross (interlink) type cable.
Figure 1.10-1 "Interlink cable wiring" shows interlink cable wiring.
*6: A BNC cable is required only if the TRIG or EMUL terminal in the emulator is used.
In a BNC cable is required, prepare one with an impedance of 50 ohms and a maximum
length of 2 meters.
Prepare a BNC cable that is compatible with both the emulator and the device connected
to the emulator.