Filter
Top Products
24
CHAPTER 2 CONNECTING THE EMULATOR
2.3 Connecting the User System
Connect a probe to the user system.
■ Connecting the user system
Connect a probe to the user system.
The method of connecting a probe to the user system depends on the probe configuration.
Table 2.3-1 "Probe configurations" summarizes the applicable probe configurations.
Note:
Before connecting the adapter board to the user system using a probe, remove the regular-
production MCU from the user system.
Table 2.3-1 Probe configurations
Cable used Probe configuration Connection to user system
Probe cable Probe cable Insert the connector
(*1)
of the probe cable header
into the appropriate connector
(*1)
of the user
system.
Flat cable Flat cable and probe
header
Insert the connector
(*1)
of the probe header into the
appropriate connector
(*1)
of the user system.
Flat cable Connect the connector of the flat cable to the
connector of the user system.
*1: The shape of the header connector depends on the model of header.
Example: IC socket and NQPACK connector