Filter
Top Products
23
2.2 Connecting an Adapter Board
2.2 Connecting an Adapter Board
Insert an adapter board (option) into the adapter board connector at the top of the
emulator unit, as shown in Figure 2.2-1 "Connecting the adapter board".
■ Connecting an adapter board
Figure 2.2-1 Connecting the adapter board
Make sure that power to the product is turned off and the power plug is
disconnected from outlet before removing or mounting boards. Doing
so may result in device problems or electric shock.
When mounting a board, make sure that it is mounted in the proper
direction. Doing so may result in device problems.
Do not apply pressure on one part of a board when mounting the
board. Attempt to distribute equal pressure on the entire board. Doing
so may result in damage to the board.
CAUTION
Prohibition
F MC-16 SERIES EMULATOR
MB2147-01
UVCC
2
POWER
Adapter board
Emulator unit