Filter
Top Products
5
1.3 General Specifications
1.3 General Specifications
This section covers the general specifications of the emulator.
■ General specifications
Table 1.3-1 "General specifications" lists the general specifications of the emulator.
The following names used in this manual have the following definitions:
• Emulator: Emulator unit + adapter board
• Emulator system: Emulator unit + adapter board + probe
Use the product according to its specifications. Doing so may result in
device problems.
CAUTION
Caution
Table 1.3-1 General specifications
Item Specification
Name F
2
MC-16L/16LX Emulator
Model name MB2147-01
Emulator power supply Power supply input +16 V 2.5 A (supplied using a special AC adapter)
Evaluation MCU power
supply
Emulator interface power
supply output
+3.3 V or +5.0 V (supplied from the emulator)
User system power supply
input
+1.8 V to +5.5 V
(*1)
10 mA or less
(*2)
(Dual source power
supply supported: Supplied from the user system)
Operating frequency
High-speed I/F 8 KHz to 33 MHz
(*3)
Conventional interface 8 KHz to 20 MHz
(*3)
Temperature +5 to +35 degrees Celsius
Humidity 20 to 80% (No condensation)
External dimensions 148(W) x 210(D) mm x 44(H) (excluding protruding sections and rubber feet)
Weight 700 g
*1: The upper and lower voltage limits depend on the evaluation MCU used.
For more information, contact the Fujitsu Sales Dept. or Support Dept.
*2: The current consumption of the evaluation MCU is excluded.
*3: The upper and lower frequency limits depend on the evaluation MCU used. The upper and lower frequency limits may
depend on the operating voltage, even if the same evaluation MCU is used. For more information, contact the Fujitsu
Sales Dept. or Support Dept.