Fujitsu MB2147-01 TV Mount User Manual


 
35
3.2 Clock Supply
3.2 Clock Supply
This section explains clock supply to the evaluation MCU.
Clock supply
The emulator supplies clock pulses to the evaluation MCU.
Figure 3.2-1 "Mounting a crystal unit" shows how to mount a crystal unit in IC sockets for a
crystal unit on the emulator. Figure 3.2-2 "Configuration of peripheral circuits for the clock
circuit" shows the configuration of peripheral circuits for the clock circuit. Figure 3.2-3 "Examples
of jumper settings for subclock selection" shows examples of jumper settings for subclock
selection. Table 3.2-1 "Settings for main clock selection" lists settings of main clock selection
switches. Table 3.2-2 "Settings for subclock selection" lists settings for subclock selection.
Figure 3.2-1 Mounting a crystal unit
Make sure that power to the product is turned off and the power plug is
disconnected from outlets before mounting crystal unit or handling
switches or jumpers. Doing so may result in device problems or
electric shock.
CAUTION
Prohibition
MAIN XTAL