Filter
Top Products
41
3.5 Switching the C Pin Setting
3.5 Switching the C Pin Setting
Set the setting of the C-pin selection switch according to whether the evaluation MCU
has the C-pin.
■ Switching the C-pin setting
On the emulator, use the C-pin selection switch to set the C-pin setting.
Figure 3.5-1 "Configuration of the peripheral circuit for C-pin selection switch" shows the
configuration of the peripheral circuit for the C-pin selection switch. Table 3.5-1 "Settings of the
C-pin selection switch" lists the switch settings.
Figure 3.5-1 Configuration of the peripheral circuit for C-pin selection switch
Make sure that power to the product is turned off and the power plug is
disconnected from outlets before handling switches. Doing so may
result in device problems or electric shock.
CAUTION
Prohibition
Table 3.5-1 Settings of the C-pin selection switch
C-pin
FC SEL setting
56
Available OFF ON
Not available ON OFF
0.1 µF/50 V
GND
1
2
3
4
5
6
7
8
FC SEL
P70P70/C
Evaluation MCU