Filter
Top Products
19
1.13 Precautions on Use
1.13 Precautions on Use
Follow the precautions described below when using the emulator.
■ Precautions on use
Note:
Follow the instructions in this manual to set up and use the emulator.
Do not use the product if it has a fault, damage, or sever wires in the
cable. Doing so may result in fire or electric shock.
Do not block the product ventilation holes. Doing so may cause
generation of excessive heat, possibly resulting in a fire.
Make sure that power to the product is turned off and the power plug is
disconnected from outlets before connecting or disconnecting cables,
removing or mounting boards, handling switches or jumpers, or
mounting parts (unless such an operation uses USB cables for plug-
and-play devices). Doing so may result in device problems or electric
shock.
Do not grasp the cable when unplugging the power plug and cable.
Always grasp the power plug or connector itself. Pulling the cable may
expose conductors or sever wires in it, possibly resulting in device
problems, fire, or electric shock.
To prevent device damage by electrostatic discharge, do not touch,
and do not let any object contact pins of connectors or other parts of
the product. Before handling the product, be sure to discharge static
electricity from your body by touching a metallic object, such as
doorknob. Doing so may result in device problems.
WARNING
Prohibition
CAUTION
Prohibition