Filter
Top Products
22
CHAPTER 2 CONNECTING THE EMULATOR
2.1 System Configuration
The emulator is designed to be connected to and controlled by a host machine. The
host machine uses emulator debugger software to control the emulator. See the
Softune Workbench Operation Manual for information on how to use the software.
■ System configuration
Figure 2.1-1 "System configuration" shows the emulator system configuration.
Figure 2.1-1 System configuration
Host machine User system
(3)
(4)
(1) (2)
Emulator
Emulator system
Emulator unit
Test equipment
(e.g., logic analyzer)
(1) Adapter board
(*1)
(2) Probe
Probe cable
(*1)
, flat cable, or flat cable + probe header
(*1)
(3) RS-232C cable
(*1)
, USB cable
(*1)
, or LAN cable
(*1)
(4) BNC cable
(*1)
*1: To be prepared separately