Filter
Top Products
ENGLISH
103
Recording pay TV programmes
Preparation
Switch on the television.
Select the »AV« channel on the television for the HDD DVD
recorder.
Put a DVD+R, DVD+RW, DVD-R or DVD-RW into the disc
compartment.
Please select the recording quality before starting the recording. See
the section on custom settings and selecting the recording quality on
page 109.
1 When you switch on the HDD DVD recorder, the current pro-
gramme that you can see on the television screen is recorded in
the time shift memory.
2 Select the required pay TV station with »
S
« or »
A
« or with
the numerical buttons »1…0«.
3 If the programme is to be recorded on the HDD archive, start
the recording with »
●«
or
if the programme is to be recorded on disc, press » « (blue)
to switch to disc mode, confirm with »OK« and
start the recording with »●«.
Notes:
During the recording, you can press »
●« to enter the switch-off
time (30 to 719 minutes in 30-minute increments). The HDD
DVD recorder automatically switches off the recording after this
time.
Press »
●« again after the elasped 719 minutes to switch the
display to the maximum recording capacity of the HDD archive.
4 Press »
7« to end the recording.
– A message appears.
Acknowledge it with »OK«.
Note:
If this message is not acknowledged, the HDD DVD recorder
continues the recording.
5 When recording onto a disc, the »YesDVD« menu appears after
a short while.
Note:
If you wish to use the YesDVD function, please read the section
on executing the YesDVD function on page 60.
If you do not wish to use the YesDVD function, select »No« with
»
S
« in the menu and confirm with »OK«.
Channels protected by Macrovision cannot be transferred into
the HDD archive.
USING A DECODER
_________________________________