Filter
Top Products
20 HP MediaSmart HDTV User Guide
A PC with LAN connection through a wired
router to the TV
B PC with LAN connection through a
wireless router to the TV
Connect the Ethernet cable
Use these steps to connect the Ethernet cable for a
wired connection to your home network:
1 Connect the Ethernet cable to your network router
and to the Ethernet LAN connector on the rear of
the TV. The LAN connector is beneath the edge of
the TV LAN label.
2 Connect power to the TV; see “Connecting power
to the TV” on page 21.
3 Turn on the TV; see “Turning the TV On and Off”
on page 23.
n
The TV internal wireless antennas do not
function as a TV antenna for air-broadcast
television signal reception.
!
You can connect your TV using both a
wired and a wireless LAN connection to
your PC router, but only one network
connection is supported at a time.
To switch, select the network type by using
the Media button, selecting the Settings
menu, and then selecting Network; see
“Changing network settings” on page 75.
A
B
c
CAUTION: Unplug power from the wall for
the TV and all connected components
before connecting to your network.