Filter
Top Products
Appendix H Software License, Warranty, Regulatory and Support
102
DECLARATION OF CONFORMITY
per ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name: Hewlett-Packard Company
Manufacturer’s Address: 5301 Stevens Creek Blvd.
Santa Clara, CA 95052 USA
declares, that the product
Product Name: HP TopTools Remote Control Card
Model(s): D6028A
Product Options: ALL
conforms to the following Product Specifications:
Safety: IEC 950-1:1991 + A1: 1992 / EN 60950-1:1992 + A1: 1993
EMC: EN 55022: 1994 / CISPR 22, Class B
EN 50082-1:1997 - Generic Immunity
IEC 801-2:1991, 4 kV CD, 8 kV AD
IEC 801-3:1992, Radiated Immunity: 3V/m
IEC 801-4:1988, Fast Transients: 0.5 kV, 1 kV
Supplementary Information:
1) During the measurements against EN55022, the I/O ports were terminated with their nominal impedance, the RS 232 and LAN
connection was terminated with the HP cable.
2) When the product is connected to other devices, the user must ensure that the connecting cables and the other devices are
adequately shielded to prevent radiation.
3) The product complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
The product herewith complies with the requirements of the following directives and carries the CE marking accordingly:
- EMC Directive 89/336/EEC
- Low Voltage Directive 73/23/EEC
Santa Clara, July 2, 1998
Nigel Marrion/Quality Manager
North American Contact:
Hewlett-Packard Company Product Regulations Manager
3000 Hanover Street
Palo Alto, CA 94304
650-857-1501
European Contact: Your local Hewlett-Packard Sales and Service Office or
Hewlett-Packard GmbH,
Department HQ-TRE
Herrenberger Straße 130
D-71034 Böblingen
(FAX: + 49-7031-143143)