Filter
Top Products
Chapter 6 Setting Up NT Graphics Console Redirection Using pcANYWHERE32
43
4. Run the pcANYWHERE32 setup program. From the Windows Start
menu, click "Run" and browse to the setup program’s location:
x
:\util\pca32\us\disk1\setup.exe
where x: is the letter of your CD-ROM drive. Follow the on-screen setup
instructions.
5. When setup is complete, you are prompted to restart. Remove the HP
NetServer Navigator CD and click OK.
Configuring pcANYWHERE32 Server Software
After you have completed pcANYWHERE32 installation at the server, you need
to configure the software to function as a host for graphics console redirection.
Once configured and enabled, the HP NetServer waits on a direct serial
connection via the HP TopTools Remote Control card’s serial port (COM4 by
default).
To configure pcANYWHERE32 on the server:
1. Run pcANYWHERE32. Either double-click the pcANYWHERE32
program icon in the pcANYWHERE32 program group, or access the
program from the Start menu.
2. At the pcANYWHERE32 main screen, click the Be a Host PC action
button.
Menu bar
Action button bar
Figure 6-2. pcANYWHERE32 Server-Side Toolbar