Filter
Top Products
Chapter 5 Logging In and Using the TopTools Remote Control Web Interface
37
Click here for HP TopTools Remote Control Online Help
Figure 5-1. HP TopTools Remote Control Web Interface Software
4. Click the Configuration tab. The login prompt is displayed.
5. In the User Name field, enter a valid administrator name. For your first
login, the factory default name is ADMIN.
6. At the password prompt, enter the password that belongs to the
administrator name. For your first login, the factory default password is
ADMIN.
NOTE The user ID and the access password for HP TopTools Remote
Control software are case sensitive. To avoid a potential
security breach allowing someone to log in using the defaults,
your first task should be to set up an administrator for the
card. Under Configuration|User, create a new user assigned to
the "Administrator" group and assign a new password. Then
delete the default ADMIN user account.
7. Once logged into the HP TopTools Remote Control web interface, create
your user groups and set your communication and notification
preferences. If you have HP TopTools Device Manager, you can perform