Filter
Top Products
18 HP MediaSmart HDTV User Guide
For a PC with an HDMI connector, connect an
HDMI cable from the PC to any of the HDMI
connectors on the TV. HDMI can transfer both
video and audio signals; however, for audio
output across HDMI, some additional PC
configuration may be needed. Consult your PC
manufacturer about how to configure HDMI audio
for your PC.
To connect a PC by using the PC Input
connectors:
1 Connect the PC or source equipment video cable
to the TV by using the PC Input (VGA) connector.
2 Connect the source equipment audio cable to the
PC Input Audio L/R connector.
3 Connect the VGA and audio cables to the PC or
source equipment.
4 Connect power to the TV; see “Connecting power
to the TV” on page 22.
5 Turn on the TV; see “Turning the TV On and Off”
on page 25.
6 Connect the power to, and turn on, the PC or
source equipment.
7 Select the input source to view, as well as the
Aspect and other options; see “Operating the TV”
on page 33.
8 Adjust the picture, including Auto Sync, by using
the PC (screen) option on the onscreen display
(OSD) Picture menu; see “Adjusting the PC screen
image” on page 70.
You can also start Auto Sync for the PC image by
pressing the Select button on the TV.
Connecting an external sound
system
You can connect an external sound system to the TV by
using the Audio Output connectors for a digital audio
or analog audio signal:
Use an optical audio cable and the Audio Output
Digital (Optical) connector on the rear of the TV to
provide a digital audio signal to an external
sound system such as a digital receiver or a
surround sound system.
Use an audio cable and the Audio Output Left and
Right connectors on the rear of the TV to provide
an analog audio signal to an external sound
system such as an analog amplifier or stereo
system.
The input source signal and the Audio menu settings in
the OSD determine the type of audio output. This TV
does not support Dolby Digital audio input over HDMI.
When connecting a set-top box, DVD player, or other
device by using the HDMI connector, set the device
audio output to PCM format. For information on the
audio output type, see “Understanding audio output”
on page 71.
c
CAUTION: Before connecting a PC, unplug
power for the TV and all connected
components. Make sure that the PC is
turned off.