HP (Hewlett-Packard) PY043AA#ABA Flat Panel Television User Manual


 
Setting Up the TV for Digital Media
Setting Up the TV for Digital Media 29
3
Finalize the TV setup.
At your TV:
a Go to your TV, select Next, and then press
OK on the remote control.
b Follow the onscreen instructions to finalize
setting up your network. The wizard checks for
the wired network, the IP address, and then for
access to the Internet across the network.
c Set up the Windows Media Center Extender if
you have the Microsoft Windows Vista Home
Premium or Home Ultimate operating system.
(The TV displays an eight-digit key and
instructions for you to enter the key into your
Media Center settings on the computer.)
d Wait while the TV looks for authorized servers
on the network. If the TV shows an error
message:
Check that the wired LAN (Ethernet) cable
is properly connected at the TV and the
router.
Check that the computer, router, and other
network equipment are all turned on.
e Press the Media button to display the Media
main menu. To use the menu, see “Using
Digital Media” on page 83.
Setting up a wireless connection
Before you begin:
For a wireless network, you need to know the
name or SSID of your network, and the network
security information (the WEP key or the WPA
passphrase.)
Make sure that the wireless network is working.
1 Follow the TV Wizard.
At your TV:
a Point the remote control at the remote control
sensor on the display and, if necessary, press
the Device button to light the HP MediaSmart
TV indicator.
b Press the Media button.
When you press the Media button on the remote
control for the first time, a wizard opens to guide
you through the setup for the network on the TV
and on the PC.
c Follow the onscreen instructions to select a
language, and so on.
d The TV shows a message when it is time to
install the software you need on your
computer.
n
The default TV Standby Mode is Fast Start.
To save electricity, change the Standby
Mode option to Power Saver on the OSD
Setup menu; see “Setting the Standby
Mode” on page 81.
n
To start the wizard after the first time,
press Media, select Settings and press OK,
select Network and press OK, and then
select Connect to a Wired Network and
press OK.
Device
DVD
CBL AVR AUX
On/Off
ScreenSleep
HP MediaSmart TV
Media