Hitachi VHS VT-S772A VCR User Manual


 
Advanced Operations - 44 -
channel as 03 or 04. You also need to manually select the channel you wish to record
on.
 If you want to change the channel, start time or stop time etc., press CORRECT
button repeatedly until the digit to be corrected flashes and then enter the correct digit.
5. Review the display to be sure everything is set as you want, then press TRANS to
store the information in the VCR's memory.
When you have set up all the timed recordings you want:
 Don't forget to load a videocassette (with the safety tab still attached) to record on.
 If you have a cable box hookup with an A-or-B switchbox, set the switchbox to the
proper connection for the programs you are recording (through the cable box for
scrambled premium channels, direct cable for all other channels).
Important: Your timed recording settings take effect when you turn off the power on the
VCR.
Tips
 If you want to select daily or weekly recording, press 4 or 7 in step 4.
 Choose between standard or extended tape speed by pressing the TAPE SPEED
button in step 4.
Caution on VCR Plus+ recording
The VCR Plus+ feature allows you to program the VCR for timer recording by simply
entering a PlusCode number up to 8 digits. To prevent erroneous channel and/or time
recording; after entering a VCR Plus+ number, check the information displayed with the
"PROGRAM REVIEW", if there is (are) any unnecessary program(s), please cancel it
(them).
Advanced Operations
This section explains how to use the VCR's remote control to operate your TV. It also
shows you how to hook up a cable box and how to connect a stereo or a second VCR
for a complete home entertainment system.
 Controlling Your TV with the VCR's Remote
Compatibility
The remote control is designed to be compatible with many televisions and cable
converters, but will not work with every one made. If your TV or cable box does not
respond the way it should when you program it as explained below, this remote may
be incapable of operating it.
Once you have programmed the remote, you won't have to do it again even if you