Hitachi VHS VT-S772A VCR User Manual


 
Getting Started (Controls) - 17 -
CHANNEL Top button switches to next higher channel, bottom button switches to the
next lower channel. For these to operate, you must have preset your channels.
JOG/SHUTTLE Turns Jog/Shuttle function on and off.
Jog Dial Moves the tape forward one frame at a time.
Shuttle Dial Controls the videocassette's forward and reverse motion with one
convenient dial.
TITLE/LAST CH Used for title making and switching to the TV channel you were
watching previously during the current viewing session.
Remote Control Buttons
Remote Control Illustration (door open)
VCR PLUS+ Used for VCR PLUS recording.
ENTER Used for VCR PLUS recording.
TRANS Transmits the information in the remote control to the VCR.
PROG Used for programming the timer.
+100/ENT Used to select the channels.
CORRECT Used for programming the timer.
CLOCK Used for clock setting.
GUIDE Brings up an on-screen setup and programming guide, the Easy Guide
System.
MODE/REMAIN Switches the VCR display.
TAPE SPEED Switches between standard play (SP) and extended play (EP).
REC Starts recording on the station the VCR is set on.
0 to 9 Number buttons used for programming the timer. Can also be used to change
channels. (Simply press 2 or 3 digits for the channel you want - such as 0 and 6 for
channel 6, or 100/ENT and 2 and 4 for channel 124.)
INPUT Used for recording from an auxiliary input such as a stereo system.
DISPLAY Used in on-screen programming and indexing.
MONITOR Controls how the audio signal is processed by the VCR.
CLEAR Used for programming the timer.
MEMORY Used for indexing.
AUTO Lets you fine tune the picture automatically.
TRACKING Lets you fine tune the picture.