Filter
Top Products
Advanced Operations (Cable Box Hookups) - 46 -
Magnavox 05 Mitsubishi 12
Sanyo 06 JVC 13
Gold Star 1 07 Sharp 14
Controlling the TV
Once programmed, the VCR's remote control is ready to control the TV.
First set the VCR/CATV/TV switch to TV, then press the button of the TV function
that you want.
For example, press CHANNEL up arrow, and the TV station will change to the next
higher station.
Set the VCR/CATV/TV switch to VCR to operate your VCR with the remote again.
Be aware that not all of your TV's functions may work even though the remote control
is correctly programmed.
Advanced Operations (Cable Box Hookups)
Hooking Up to a Cable Box
The cable box brings all the advantages of pay cable, but finding a satisfactory hookup
can be challenging. To sort out what to do, we suggest a step-by-step approach to
installation.
You will need RF TV splitters, coaxial cable jumpers, and possible RF switches to try
various configurations. These are not furnished with your VCR because each
installation will have different needs and require different cable lengths.
Before you begin, take a close look at the back of your TV to see where cables are
currently connected. You may need to reconnect them that way later. As an aid to
memory, use masking tape to label each cable and connection.
A Step-by-Step Approach
Try the hookups listed as Options 1 through 4. They are based on whether the cable
channels signals are scrambled, unscrambled, or a combination. (Your cable company
can tell you more about this.)
After each hookup, power up the VCR and the TV. Use the Initial Setup screen (page
23) to select option CATV1 or CATV2. Then check out the system using these
questions as a guide.
Does the TV receive the same number of channels as before the installation?
Does the VCR record all channels?
Do the VCR and TV remote control functions work?
Can I record on one channel while watching another?
Do I receive my pay channels, and do all special cable features work?
If any function does not work, or works in an unexpected way, hook up everything the
way it was when you started and begin again with the next hookup option.