Insignia NS-WBRDVD3 DVD Player User Manual


 
34
Wireless 3D Connected Blu-ray Disc Player
www.insigniaproducts.com
MP3/WMA audio file requirement (USB/DISC)
File extensions: .mp3, .wma
Sampling frequency: Within 32 to 48kHz (WMA),
within 8 to 48kHz (Mp3)
Bit rate: Within 32-192kbps (WMA) 32-
320kbps (MP3)
CD-R/RW, DVD R/RW, BD-R/RE Format:
ISO 9660+JOLIET, UDF and UDF Bridge format
Maximum Files/Folder: Less than 2000 (total
number of files and folders)
Depending on the size and number of the
MP3/WMA files, it may take several minutes to
read the contents of the media.
HD WMA movie files contained on a USB 1.0/1.1
flash drive may not play correctly. Blu-ray, DVD, or
USB 2.0 are recommended to play back HD WMA
movie files.
Photo file requirement (USB/DISC)
File extensions: .jpg, .jpeg, .png, .gif
Recommended size:
PNG: 5120 × 5120 pixels
GIF: 10000 × 10000 pixels
JPEG/JPG: 8192 × 8192 pixels, 32MB
CD-R/RW, DVD R/RW, BD-R/RE Format:
ISO 9660+JOLIET, UDF, and UDF Bridge format
Maximum Files/Folder: Less than 1000 (total
number of files and folders)
Progressive and lossless compression photo
image files are not supported.
Depending on the size and number of the photo
files, it may take several minutes to read the
contents of the media.
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
You are cautioned that changes or modifications not expressly
approved by the part responsible for compliance could void the
user's authority to operate the equipment.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV
technician for help.
DHHS and FDA safety certification
This product is made and tested to meet safety standards of the
FCC, requirements and compliance with safety performance of
the U.S. Department of Health and Human Services, and also
with FDA Radiation Performance Standards 21 CFR Subchapter J.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
1. Under Industry Canada regulations, this radio transmitter
may only operate using an antenna of a type and maximum (or
lesser) gain approved for the transmitter by Industry Canada. To
reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent
isotropic ally radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le
présent émetteur radio peut fonctionner avec une antenne d'un
type et d'un gain maximal (ou inférieur) approuvé pour
l'émetteur par Industrie Canada. Dans le but de réduire les
risques de brouillage radioélectrique à l'intention des autres
utilisateurs, il faut choisir le type d'antenne et son gain de sorte
que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne
dépasse pas l'intensité nécessaire à l'établissement d'une
communication satisfaisante.
2. This equipment complies with IC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm
between the radiator and your body.
"Cet équipement est conforme à l'exposition aux rayonnements
IC limites établies pour un environnement non contrôlé. Cet
équipement doit être installé et utilisé avec un minimum de 20
cm de distance entre le radiateur et votre corps."
3. "This device complies with Industry license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may
cause undesired operation of the device."
"Ce dispositif est conforme à la norme de l'industrie RSS exempts
de licence (s). Son fonctionnement est soumis aux deux
conditions suivantes: (1) cet appareil ne peut pas provoquer
d'interférences et (2) cet appareil doit accepter toute
interférence, y compris les interférences qui peuvent causer un
mauvais fonctionnement du dispositif."