JVC DR-M1SLB DVR User Manual


 
Masterpage:Right-No-Heading
Filename [DR-M1EK_11Subsidiary.fm]
Page 107 August 15, 2003 7:53 pm
107
Finalise a disc
Finalising DVD-R/RW discs recorded on this unit makes it
possible for the discs to be played back on other DVD players.
DVD-RW discs are finalised in the mode that the discs were
formatted, enabling playback on compatible DVD players.
Titles input in the Library Database DVD Navi are registered as
titles in the DVD menu. (
pg. 32, 70)
Before finalising
It is possible to record on a blank space.
It is possible to enter a programme title. (
pg. 70, “Modify
Programme Name”)
It is possible to delete programmes. (
pg. 71, “Delete
programme”)
It is impossible to overwrite recorded areas of DVD-R discs.
Available recording capacity does not increase even if a
recorded programme is deleted from a DVD-R disc.
It is impossible to record or edit DVD-R/RW discs recorded on
other devices even if they have not been finalised.
After finalising (For DVD-R/RW (Video mode) discs)
Video and audio that have been recorded by then are recorded
in conformity to the DVD Video standard, enabling you to play
back the discs as DVD VIDEO discs. (
pg. 7, “Discs for
Playback Only”)
Although DVD-R/RW discs finalised on this unit become
playable on DVD players compatible with DVD-R/RW discs,
some discs still may not play, for which JVC cannot take
responsibility.
Marked points marked before finalising will be deleted, and
programmes will be divided automatically into “chapters”
approximately every 5 minutes. (
pg. 34, “Marking
positions to play again later”)
Depending on the DVD players and DVD-R/RW discs used,
and on the conditions of recording, it may not be possible to
play back the discs. In this case, play back the discs on this
unit.
Additional recordings become impossible.
Finalise a DVD-R/RW disc
A
Finalise the disc.
A
Press
rt
to select “FINALISE”, then press
ENTER
.
Press
we
to select “YES”, then press
ENTER
when
“DISC WILL BE FINALISED” appears on the TV screen.
B
Press
we
to select “OK”, then press
ENTER
when
“FINALISING WILL MAKE DISC READ-ONLY”
appears on the TV screen.
B
Return to the normal screen.
Press
SET UP
.
Menu screen is cleared.
The Library Database DVD Navi screen is not displayed once a
DVD-R/RW (Video mode) disc has been finalised. The DVD
menu appears instead. On the other hand, the Library
Database DVD Navi screen is displayed even after a DVD-RW
(VR mode) disc has been finalised. (
pg. 66)
Recording and editing can be performed, even after finalising,
on a DVD-RW (VR mode) disc finalised on this unit.
Once a DVD-RW (VR mode) disc has been finalised, it can be
played on DVD players compatible with VR mode.
Cancel the finalisation of a DVD-RW
disc
A
Cancel the disc finalisation.
A
Press
rt
to select “CANCEL DISC FINALISATION”,
then press
ENTER
.
B
Press
we
to select “OK”, then press
ENTER
when
“CANCEL DISC FINALISATION” appears on the TV
screen.
B
Return to the normal screen.
Press
SET UP
.
When the disc finalisation is cancelled, the mode in which the
disc was formatted is restored, making the disc recordable.
(
pg. 8, 106)
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the
TV/CABLE/SAT/DVD
switch to
DVD
.
Load a DVD-R/RW disc to finalise.
Perform steps
A
to
B
of “Format a DVD-RAM disc”
(
pg. 106) before continuing.
Load a DVD-RW disc to cancel the disc finalisation, and
perform steps
A
to
B
of “Format a DVD-RAM disc”
(
pg. 106) before continuing.
DR-M1EK_01.book Page 107 Friday, August 15, 2003 7:53 PM