Filter
Top Products
Filename [DR-M1EK_06Name.fm]
Masterpage:Left+
Page 22 August 15, 2003 7:53 pm
INITIAL SETTINGS (cont.)
22
NOTES:
●
In areas where no TV station transmits a PDC (Programme
Delivery Control) signal, the unit can perform neither Auto
Clock Set nor Auto Guide Program Number Set.
●
If there is a power cut, or if you press
1
or
SET UP
while Auto
Set Up is in progress, Auto Set Up will be interrupted; be sure
to turn off the unit power once and try again from step
A
.
●
Auto Clock Set may not function properly depending on the
reception condition.
A
TTENTION:
Once you have performed Auto Set Up, even if the unit’s
memory backup has expired, all the stored stations and their
Guide Program numbers remain in the unit’s memory and the
unit will not perform Auto Set Up again. The unit only
performs Auto Clock Set when the unit is turned on.
If you have moved to a different area, perform each setting as
required.
●
Tuner setting (
੬
pg. 98)
●
Clock setting (
੬
pg. 104)
If a new station starts broadcasting in your area, perform
tuner setting. (
੬
pg. 98, “Tuner Set”)
After “Auto Set Up” is completed, perform “Monitor
Set” on page 25.
DR-M1EK_01.book Page 22 Friday, August 15, 2003 7:53 PM