Filter
Top Products
Masterpage:Right0
Filename [DR-M1EK_08Recording.fm]
Page 53 August 15, 2003 7:53 pm
53
RECORDING
Basic Recording
A
Load a disc.
A
Press
x
to open the disc tray.
B
Place a recordable disc on the disc tray.
●
For details, refer to “Placing a Disc” (
੬
pg. 10).
C
Press
x
to close the disc tray.
B
Choose a programme.
Press
PR +/–
or the
number keys
to select the channel
you wish to record.
C
Set the recording speed.
Press
REC MODE
repeatedly until the desired recording
speed appears.
●
Each time you press
REC MODE
, the recording speed changes
as follows:
XP
]
SP
]
LP
]
EP
]
FR60–FR360*
]
(Back to the
beginning)
* The value is selectable from 1 to 6 hours in 5-min. increment by
pressing
we
repeatedly after selecting “FR60–FR360”. To change
the value in 30-min. increments, press and hold
we
.
●
For details on the recording speed, see page 54.
D
Start recording.
Press and hold
7
, then press
4
on the remote control, or
press
7
on the unit.
E
Pause recording.
Press
9
.
●
To resume recording, press
4
.
F
Stop recording.
Press
8
.
It takes about 10 seconds to end the writing session when
you stop recording.
NOTES:
●
It is recommended to format a DVD-RAM disc before use if
you use the disc on this unit for the first time.
●
When using a brand-new DVD-RW disc, format the disc either
in VR mode or in Video mode. (
੬
pg. 106, “Format a
DVD-RW disc”)
●
You can record up to 99 programmes and 999 play lists on
each disc.
●
Some programmes can only be recorded one time.
●
When recording is started, an index of the first part of
recording is automatically recorded (
੬
pg. 66, “Library
Database DVD Navi”). To record a satellite programmes, refer
to page 65. To delete the index, refer to page 71.
●
Recording sometimes may stop or cannot be performed even if
there is enough available capacity remaining on the disc.
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the
TV/CABLE/SAT/DVD
switch to
DVD
.
A
TTENTION:
It is not possible to record programmes on a DVD-R disc
which has already been finalised.
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording (ITR) (
੬
pg. 54) or timer recording (
੬
pg. 56,
58), the recording will resume automatically when power is
restored to the unit unless the unit’s memory backup has
expired.
DR-M1EK_01.book Page 53 Friday, August 15, 2003 7:53 PM