Filter
Top Products
Filename [DR-M1EK_11Subsidiary.fm]
Masterpage:Left+
Page 94 August 26, 2003 2:49 pm
SUBSIDIARY SETTINGS (cont.)
94
RECORDING SET
(The boldface settings in the table below indicate the settings at your purchase.)
8 SAVE AS LIBRARY
OFF
ON
When this function is set to “ON”, the recording information is automatically
stored in the library. For details, refer to “Modify Library Information”
(
੬
pg. 76).
8 XP MODE REC AUDIO
DOLBY DIGITAL
LINEAR PCM
You can select the audio format when you record a programme in XP mode.
When this function is set to “LINEAR PCM”, you can obtain a high-quality
audio sound.
DOLBY DIGITAL
:
To record in Dolby Digital format.
LINEAR PCM
:
To record in Linear PCM format.
8 AUDIO REC
NICAM 1/MAIN
NICAM 2/SUB
MONO
You can select the desired NICAM audio channel to be recorded on a DVD-R/
RW (Video mode) disc.
NICAM 1/MAIN
:
To record the main language of NICAM audio.
NICAM 2/SUB
:
To record the sub language of NICAM audio.
MONO
:
To record the standard (monaural) sound of NICAM audio.
NOTE:
This function works only for the NICAM bilingual programme.
8 DIRECT REC
OFF
ON
When this function is set to “ON”, you can easily start recording the
programme that you are watching on your TV. Press and hold
7
and press
4
on the remote control, or press
7
on the unit.
NOTES:
●
When you use the Direct Rec function, be sure to use a TV offering T-V LINK, etc. and
connect a fully-wired 21-pin SCART cable between the unit and the TV. (
੬
pg. 18)
●
If “DIRECT REC” is set to “OFF”, the
7
button functions as described in “Basic
Recording” (
੬
pg. 53).
●
During Direct Rec, “– –” appears on the front display panel.
●
If a programme is recorded with the Direct Rec, the station name will not be registered
in the library. “– – – –” will be displayed for the station name.
●
Even if there is no power supply for more than 60 minutes, the unit keeps the setting.
DR-M1EK_11Subsidiary.fm Page 94 Tuesday, August 26, 2003 2:49 PM