Filter
Top Products
Masterpage:Right0
Filename [DR-M1EK_06Name.fm]
Page 21 August 18, 2003 8:29 pm
21
INITIAL SETTINGS
Auto Set Up
Auto Channel Set/Auto Clock Set/
Auto Guide Program Number Set
A
Turn on the unit.
On the unit
Press
1
on the unit.
On the remote control
Press
DVD
1
on the remote control.
●
The AUTO SET/T-V LINK display appears on the TV screen.
B
Perform Auto Set Up.
●
When you have connected the unit to a TV offering T-V Link
via a fully-wired 21-pin SCART cable (
੬
pg. 18) and the TV is
turned on, the unit automatically performs the Preset
Download (
੬
pg. 23) even if you select “AUTO SET” for Auto
Set Up function.
After the
1
button on the unit (or
DVD
1
on the remote
control) is pressed for the first time to turn on the unit
, the
Auto Set Up function sets the tuner channels, clock and
Guide Program numbers automatically.
Before starting, make sure of the following:
●
The TV aerial cable should be connected to the unit.
●
The unit’s mains power cord should be connected to a
mains outlet.
●
Turn on the TV and select the AV mode.
●
Slide the
TV/CABLE/SAT/DVD
switch to
DVD
.
Press
rt
to move the arrow
to “AUTO SET”, then press
ENTER
.
“AUTO” blinks on the front display panel; do NOT
press any button on the unit or remote control until
the front display panel shows “– –:– –” as illustrated
on page 24.
●
The AUTO SET screen will
appear.
DR-M1EK_06Name.fm Page 21 Monday, August 18, 2003 8:30 PM