Filter
Top Products
Filename [DR-M1EK_06Name.fm]
Masterpage:Left+
Page 20 August 18, 2003 8:29 pm
INSTALLING YOUR NEW UNIT (cont.)
20
Component Video
Connection
Component video connection enables you to obtain high-quality
component video pictures.
8To connect to TV’s component video input connectors
A
Connect the unit to TV.
A
Perform
A
–
C
in step
B
in “Basic Connections”
(
੬
pg. 18).
B
Connect the unit’s COMPONENT VIDEO OUT
connectors to the TV’s component video input
connectors.
C
Connect the unit’s AUDIO OUT connectors to the TV’s
AUDIO input connectors.
B
Connect the unit to mains.
Connect the AC plug of the mains power cord into a
mains outlet.
NOTES:
●
If your TV is not stereo-capable, use the unit’s AUDIO OUT
connectors to connect to an audio amplifier for Hi-Fi stereo
sound reproduction.
●
For switching the TV’s video input mode, refer to the
instruction manual of your television.
Back of TV
Aerial connector
Component Video
Input connectors
AUDIO input connectors
Component Video
cable
(not provided)
Audio cable (not provided)
Mains outlet
Mains power cord
Back of unit
RF cable (provided)
AUDIO OUT
TV aerial cable
COMPONENT VIDEO OUT (L-1)
After the connection is completed, perform “Auto Set
Up” on page 21.
DR-M1EK_06Name.fm Page 20 Monday, August 18, 2003 8:30 PM