Filter
Top Products
H EN
34
Clock Setting
9 Usually performed automatically using auto
setup or preset download. If cannot be set
automatically in some regions, set them
manually.
.
........................................................
.
NOTES:
0 Just Clock (when set to AONB) adjusts the unit’s built-
in clock every 3 hours from 03:00 to 21:00. The unit’s
clock is also automatically adjusted at the start/end of
Summer Time.
0 Just Clock functions by the PDC signal.
0 Just Clock does not function in the following
instances.
• When the unit is on.
• When the clock is not set.
• During timer recording, EPG data downloading or
Automatic Satellite Programme Recording.
• When AL-2 SELECTB is set to ASAT VIDEO/RGBB or
ASAT S-VIDEO/RGBB.
• When the reception is poor.
.
........................................................
.
IMPORTANT:
0 The default setting for Just Clock is AONB.
0 It is recommended to set to AONB in areas where the
PDC signal can be properly received. Set to AOFFB in
areas where the signal is unstable.
A Access the setup menu.
B Select “INITIAL SET UP”.
C Select “CLOCK SET”.
D Select and confirm on “YEAR”.
E Select and confirm on “DATE”.
0 Press and hold the Selection Keys (FG) to
change the ADATEB in 15-day intervals.
F Select and confirm on “TIME”.
0 Press and hold the Selection Keys (FG) to
change the ATIMEB in 30-minute intervals.
G Set “JUST CLOCK”.
A Select and confirm on AJUST CLOCKB.
B Select ATV PROGRAMMEB to set the
channel.
H Exit setup.
A, H
B - G
SELECT
CLOCK SET
INITIAL SET UP
SELECT
SELECT
CONFIRM
2005
YEAR
SELECT
CONFIRM
SELECT
CONFIRM
DR-MX10SE.book Page 34 Wednesday, December 14, 2005 3:37 PM