Filter
Top Products
H EN
66
Formatting
A Load a disc.
B Select “FORMAT”.
A Access the setup menu.
B Select AHDD/DVD SET UPB B ADISC SET
UPB B AFORMATB.
0 This screen will not be displayed in the case of a
DVD-R disc. Proceed to step D.
D Select “EXECUTE”.
0 When formatting a DVD-RW disc, confirm on
the mode to be formatted.
If a ACOMPLETEDB message is displayed,
0 Press ENTER to return to the setup menu.
E Exit formatting.
ABCDEFGHILM
9 Formatting will erase all the data. As such,
before formatting a recorded disc, make sure
the disc does not contain important
recordings.
9 Brand new DVD-RAM or DVD-RW discs
may also need to be formatted.
9 To use a DVD-R disc in VR mode, format the
new disc in VR mode. (It will be in Video
mode when not formatted.)
.
........................................................
.
CAUTIONS:
0 Never turn off the unit or disconnect the AC power
cord while ANOW FORMATTING...B is displayed on
the TV screen.
0 All the titles on a disc will be deleted once the disc is
formatted even if they are protected titles. [ P88]
0 DVD-R discs can only be formatted once.
B - B
- D
B -
A
E
SELECT
FORMAT
DISC SET UP
HDD/DVD SET UP
CONFIRM
C For DVD-RAM For DVD-RW
Select AEXECUTEB.Select AVR MODEB or
AVIDEO MODEB.
EXECUTE
VIDEO MODEVR MODE
Formatting a new disc
DVD-RAM
A When the disc is loaded, the screen in step
D is displayed.
B Select AEXECUTEB to format.
DVD-RW
A When the disc is loaded, the screen in step
C is displayed.
B Select the desired mode and start
formatting.
SELECT
EXECUTE
CONFIRM
DR-MX10SE.book Page 66 Wednesday, December 14, 2005 3:37 PM