Filter
Top Products
H EN
52
VIDEO Plus+ Timer
Programming
ABCDEFGHILM
9 With VIDEO Plus+ system, timer
programming can be set simply by entering
the number corresponding to the TV
programme.
9 You can programme up to 16 programmes,
including other programmes, within 1
month.
.
........................................................
.
PREPARATION:
0 Switch TV/DVD on the remote control to DVD.
0 Load a recordable disc when recording to a DVD
disc. [ P12]
.
........................................................
.
IMPORTANT:
0 Timer programming of an external receiver cannot be
set using the programme navigation.
0 When you have moved to other regions, perform
guide channel settings again. AVIDEO Plus+ Guide
Channel SetB [ P35]
0 Timer programming on the VHS is not possible.
.
........................................................
.
NOTES:
0 If there is inactivity for approximately 1 minute during
setting, the settings will be cancelled and the screen
will return to the broadcast screen.
0 To discontinue programming, press PROG and select
AEXITB.
0 See ATimer RecordingB [ P97].
A Display the programme navigation
screen.
B Select “VIDEO PLUS+”.
C Set VIDEO Plus+.
A Enter the PlusCode number.
0 Can also be entered using the Number Keys.
B If necessary, select ARECORD TOB, then
select the recording deck.
C Select ACONFIRMB.
0 When the number is invalid, an error message
will be displayed.
If the guide channel has not been set
A A warning screen will be displayed.
Pressing ENTER displays the timer
programme setting screen.
B Select ATV PROGB, then the receiving
channel.
0 Other items can also be set.
C Select ACONFIRMB.
0 The guide channel information of the channels
available in ATV PROGB is stored on this unit.
0 See AVIDEO Plus+ Guide Channel SetB
[ P35].
TV
DVD
A
B - F
Number
Keys
G
VIDEO PLUS+
SELECT
CONFIRM
SELECT
CONFIRM
CONFIRM
SELECT
CONFIRM
DR-MX10SE.book Page 52 Wednesday, December 14, 2005 3:37 PM