Filter
Top Products
167
Appendices
The following table shows the relation between the MIDI
messages that are transmitted when the X50/microX’s con-
trollers are operated, and the AMS (alternate modulation
source) or DMS (dynamic modulation source) that corre-
spond to each MIDI message. # indicates a fixed function,
and ✽ indicates an assignable function.
X50/microX controller
Available
for AMS
Available
for DMOD
Joy
Stick
(microX)
[PITCH]
Wheel
(X50)
[MOD]
Wheel
(X50)
R.T.C.
A
R.T.C.
B
R.T.C.
Value
Valve
On/Off
Gate
Knob
Velocity
Knob
SW1,2
(X50)
ARP
On/Off
Damper
Switch Pedal
MIDI channel messages
Note-off
Note-on (note number) ✽✽
Note-on (velocity) ✽✽
Poly after touch ✽
CC#
0 Bank select (MSB) ✽
1 Modulation 1 # (+Y) # ✽ ✽✽✽✽
2 Modulation 2 # (–Y) ✽ ✽✽✽✽
3– ✽
4Foot controller ✽ ✽✽✽
5Portamento time ✽ ✽
6 Data entry (MSB) ✽
7Volume ✽ ✽
8Post insertion effect pan ✽ ✽
9– ✽
10 Pan ✽ ✽
11 Expression ✽ ✽
12 Effect control 1 ✽ ✽✽
13 Effect control 2 ✽ ✽✽
14...15 ✽
16 Ribbon controller ✽ ✽✽✽✽
17 Knob modulation 1 ✽ ✽✽
18 Controller (CC#18) # ✽ ✽✽✽✽
19 Knob modulation 2 ✽ ✽✽
20 Knob modulation 3 ✽ ✽✽
21 Knob modulation 4 ✽ ✽✽
22...31 – ✽
32 Bank select (LSB) ✽
33...37 – ✽
38 Data entry (LSB) ✽
39...63 – ✽
64 Damper ✽ # ✽✽
65 Portamento On/Off ✽✽✽✽✽
66 Sostenuto On/Off ✽✽✽✽
67 Soft ✽✽✽
68...69 – ✽
70 Sustain level ✽
71 Filter resonance level/High
pass filter cutoff frequency
✽
(Knob2)
✽
72 Release time ✽
(Knob4)
✽
73 Attack time ✽
74 Low pass filter cutoff frequency ✽
(Knob1)
✽
75 Decay time ✽
76 LFO1 speed ✽
77 LFO1 depth (pitch) ✽
78 LFO1 delay ✽
79 Filter EG intensity ✽
(Knob3)
✽
80 SW1 modulation On/Off ✽✽
(SW1)
✽✽✽
81 SW2 modulation On/Off ✽✽
(SW2)
✽✽✽
82 Foot switch On/Off ✽✽✽✽
83 Controller (CC#83) ✽ ✽✽
84...90 - ✽
91 Effect depth 1 (send 2 level) ✽ ✽
92
Effect depth 2 (insertion effect On/Off)
✽
93 Effect depth 3 (send 1 level) ✽ ✽
94
Effect depth 4 (master effect 1 On/Off)
✽
95
Effect depth 5 (master effect 2 On/Off)
✽
96 Data increment
97 Data decrement
98 NRPN(LSB)
2: Arpeggiator on/off switch # ✽
10: Arpeggiator gate control #
11: Arpeggiator velocity control #
99 NRPN(MSB) 0 #### # ✽
100 RPN(LSB)
0: Bend range
1: Fine tune
2: Coarse tune
101 RPN(MSB) 0
102...127 -
Program change ✽
Channel after touch ✽✽✽✽
Bender change # (X) # ✽✽
Universal exclusive
Master volume ✽ ✽
Master balance
Master fine tune
Master coarse tune