Filter
Top Products
66
4–3: 2–2..8 (MIDI Filter2–2 T01–08)
4–4: 2–2..16 (MIDI Filter2–2 T09–16)
4–3(4)a: Realtime Control Knob 3, 4
Knob3 [Off, On]
Specifies whether or not the A-mode [3] knob MIDI control
change message #79 (filter EG intensity) and the B-mode [3]
knob MIDI control change message will be received.
Knob4 [Off, On]
Specifies whether or not the A-mode [4] knob MIDI control
change message #72 (the release time of the filter and amp
EG’s) and the B-mode [4] knob MIDI control change mes-
sage will be received.
■ 4–3(4): UTILITY
☞“Write Multi,” “Copy From Combi” (0–1)
X50:
4–5: 2–3..8
(MIDI Filter2–3 T01–08)
X50:
4–6: 2–3..16
(MIDI Filter2–3 T09–16)
4–5(6)a: SW1, SW2
SW1, SW2 [Off, On]
Specifies whether the operations of [SW1] and [SW2] will be
received.
These correspond to the control change messages assigned
in the 7: Ed–Arp/Ctrls page. This setting is valid if you have
selected SW1 Mod. (CC#80), SW2 Mod. (CC#81), or
Porta.SW (CC#65).
■ 4–5(6): UTILITY
☞“Write Multi,” “Copy From Combi” (0–1)
X50:
4–7: 2–4..8
(MIDI Filter2–4 T01–08)
microX:
4–5: 2–3..8
(MIDI Filter2–3 T01–08)
X50:
4–8: 2–4..16
(MIDI Filter2–4 T09–16)
microX:
4–6: 2–3..16
(MIDI Filter2–3 T09–16)
X50
microX
X50: 4–7(8)a/microX: 4–5(6)a: Foot Pedal/
Switch, Other Control Change
Foot Pedal/Switch [Off, On]
Specifies whether or not the effect of the ASSIGNABLE
PEDAL/SWITCH will be received. The function of this
switch is set in GLOBAL 0–3: System Foot page. This is valid
when the switch is set to a MIDI control change.
Other Ctrl Change [Off, On]
Specifies whether or not MIDI control change messages
other than those included in MIDI Filter 1, 2 will be
received.
■ X50: 4–7(8)/microX: 4–5(6): UTILITY
☞“Write Multi,” “Copy From Combi” (0–1)
4–3a
4–5a
4–7a
4–5a