Filter
Top Products
168
X50/microX operations when control changes are
transmitted/received
The following table shows the operations that the X50/
microX will perform when control change messages are
received, and the relation between settings and controller
movements on this instrument
CC#
Control Value Function
0 Bank select (MSB) 0...127 bank select message MSB
1 Modulation 1 0...127 X50: Corresponds to [MOD] wheel movement in the up direction
microX: Corresponds to joystick movement in the +Y (up ) direction
2 Modulation 2 0...127 X50: Used to control Alternate Modulation (corresponds to AMS: JS–Y #02) or Effect
Dynamic Modulation (corresponds to Dmod Src: JS–Y#2)
microX: Corresponds to joystick movement in the –Y direction (down)
4Foot controller 0...127 corresponds to when the assignable pedal function is set to Foot Pedal
5Portamento time 0...127 portamento time
6 Data entry (MSB) 0...127 MSB of RPN and NRPN data *1
7Volume 0...127 volume *2
8Post insertion effect pan 0...127 pan after the insertion effect
10 Pan 0...127 pan
11 Expression 0...127 volume *2
12 Effect control 1 0...127 for controlling Effect Dynamic Modulation (same as Dmod Src: FX1 #12)
13 Effect control 2 0...127 for controlling Effect Dynamic Modulation (same as Dmod Src: EX2 #13)
16 Controller (CC#16) 0...127 for controlling Modulation, Alternate Modulation (same as AMS: Ribbon #16), Effect
Dynamic Modulation (same as Dmod Src Rbn#16)
17 Knob modulation 1 0...127 corresponds to when Knob Mod.1 is assigned as the B-mode function
of a REALTIME CONTROLS knob
18 Controller (CC#18) 0...127 for controlling Alternate Modulation (same as AMS: Slider #18), Effect Dynamic Modula-
tion (same as Dmod Src: Sld #18)
19 Knob modulation 2 0...127 corresponds to when Knob Mod.2 is assigned as the B-mode function
of a REALTIME CONTROLS knob
20 Knob modulation 3 0...127 corresponds to when Knob Mod.3 is assigned as the B-mode function
of a REALTIME CONTROLS knob
21 Knob modulation 4 0...127 corresponds to when Knob Mod.4 is assigned as the B-mode function
of a REALTIME CONTROLS knob
32 Bank select (LSB) 0...127 LSB of bank select message
38 Data entry (LSB) 0...127 LSB of RPN or NRPN data *1
64 Damper 0...127 damper effect
65 Portamento On/Off 0...63(Off), 64...127(On) turn the portamento effect on/off
66 Sostenuto On/Off 0...63(Off), 64...127(On) turn the sostenuto effect on/off
67 Soft 0...127 soft pedal effect
70 Sustain level 0...127 sustain levels of the filter EG and amp EG *3
71 Filter resonance level
High pass filter cutoff frequency
0...127 resonance level of the filter
cutoff frequency of the high pass filter
*4
*3
72 Release time 0...127 release times of the filter EG and amp EG *3
73 Attack time 0...127 attack times of the filter EG and amp EG *3
74 Low pass filter cutoff frequency 0...127 cutoff frequency of the low pass filter *3
75 Decay time 0...127 decay times/slope times of the filter EG and amp EG *3
76 LFO1 speed 0...127 LFO1 speed *3
77 LFO1 depth 0...127 pitch LFO1 intensity *3
78 LFO1 delay 0...127 LFO1 delay *3
79 Filter EG intensity 0...127 filter EG intensity *3
80 Panel switch1 On/Off 0...63(Off), 64...127(On) X50: Corresponds to On/Off when the SW1 function is set to SW1 Mod.
microX: Used to control Alternate Modulation and Effect Dynamic Modulation
81 Panel switch2 On/Off 0...63(Off), 64...127(On) X50: Corresponds to On/Off when the SW2 function is set to SW2 Mod.
microX: Used to control Alternate Modulation and Effect Dynamic Modulation
82 Foot switch On/Off 0...63(Off), 64...127(On) corresponds to on/off when the function of the assignable foot switch is set to Foot SW
83 Controller (CC#83) 0...127 for controlling Alternate Modulation (same as AMS: MIDI CC#8), Effect Dynamic Modulation
(same as Dmod Src: CC#83)
91 Effect depth 1 (send 2 level) 0...127 send 2 level
92 Effect depth 2 (insertion effect On/Off) 0(Off), 1...127(On) turn insertion effect on/off *5
93 Effect depth 3 (send 1 level) 0...127 send 1 level
94 Effect depth 4 (master effect 1 On/Off) 0(Off), 1...127(On) master effect 1 on/off *5
95 Effect depth 5 (master effect 2 On/Off) 0(Off), 1...127(On) master effect 2 on/off *5
96 Data increment 0
97 Data decrement 0
98 NRPN(LSB) 2
10
11
corresponds to the arpeggiator on/off switch
corresponds to the arpeggiator Gate control knob
corresponds to the arpeggiator Velocity control knob
*6
*6
*6
99 NRPN (MSB) 0 MSB of NRPN
100 RPN(LSB) 0
1
2
select the pitch bend range
select Fine Tune
select Coarse Tune
*1
*1
*1
101 RPN(MSB) 0 MSB of RPN