Filter
Top Products
25
English
3139 246 XXXXX
CHANNEL SEARCH
Automatic channel search will find and
store all channels. Make sure to connect
the antenna.
Search channels
Skip Search
Start
Note: Make sure you have successfully
made all the required connections to the
DVD recorder, the TV and Satellite
Receiver/Cable Box (if any) and switched
them on. The automatic channel search
will detect the signals and save all the
available program channels.
0 Press OK again to start automatic TV
channel search.
! When TV channel search is complete,
press OK to continue.
➜ The { Time and Date } menu appears
on the TV.
TIME AND DATE
Please check the Date and if incorrect, navigate
right to correct the Date.
Time
Date
Done
09:00 PM
06.30.2004
OK
" Check if the information on the menu is
correct.
➜ If required changes, follow steps 4~8
of “Setting the time and date” on page 28.
§ Press 4 to select { Done } and press OK
to save the changes.
The DVD recorder is ready for use!
Installing the DVD Recorder (cont’d)
TIPS: Press OK to exit the initial installation menu.
Press RETURN to go back to previous menu item.
Helpful Hints:
– If the DVD recorder cannot find any TV
stations, select program number {1} on the
TV set or check the cable connection from
the antenna jack to the DVD recorder and
TV set.
– If the sound or picture is distorted on any
of the stored TV channels, see pages 26~27
“TV channel programming” for manual TV
search.
MRV660_17_Eng40 9/3/05, 10:25 AM25