Magnavox MRV660 DVD Recorder User Manual


 
63
English
3139 246 XXXXX
Troubleshooting (cont’d)
Disc will not play.
No picture.
The picture is distorted or
black and white during
playback.
Distorted sound coming
from a connected hi-fi
amplifier.
No sound.
Insert the disc with the label facing up.
The child lock is on. Read chapter Setting Access Control -
Activating/Deactivating the child lock for details.
Wrong region code. The DVD must be coded for ALL regions or
Region 1 in order to play on this DVD recorder.
There is no recording on the disc or wrong disc type. Read
chapter Playback - Playable discs for details.
Make sure the disc is not scratched or warped. Clean the disc or
replace a new one.
Check if the disc is defective by trying another disc.
Turn on your TV and set to the correct Video In channel. Change
the TV channel until you see the DVD screen. Read chapter
Connecting to TV - General for details.
Check the video connection between the DVD recorder and the
TV.
PAL input signal received from external device is not supported.
The disc does not match with the TV color system standard
(PAL/NTSC).
The disc is dirty, clean the disc.
Sometimes a small amount of picture distortion may appear. This
is not a malfunction.
If you set the Record Mode to a low-quality speed, change to a
higher-quality speed after you finish recording. Leaving the DVD
recorder set to a low-quality speed may affect the picture quality
when playing DVDs later. Read chapter Recording - Recording
settings for details.
The recording can be made in color only when the TV channels
or the connected additional device sends a color signal. In some
situations, programs that are broadcast in black and white cannot
be recorded.
Do not connect any cables from the DVD recorder to the
'Phono' input of your amplifier.
Do not connect the DVD recorders Coaxial DIGITAL AUDIO
OUT jack to an analog jack (red/white) on the connecting
devices.
Check the audio connections, the red and white jacks. Read
chapters Connecting to TV or Connecting to Additional
Devices for details.
You cannot hear MP3 playback if you are using the Coaxial
DIGITAL AUDIO OUT jack for sound from the DVD recorder.
Set the Analog output or Digital output correctly, based on the
equipment you connected to the DVD recorder. Read chapter
System Menu - Setup for details.
PAL input signal received from external device is not supported.
Problem Solution
MRV660_17_Eng40 9/3/05, 10:26 AM63