Magnavox MRV660 DVD Recorder User Manual


 
67
English
3139 246 XXXXX
IS THE TV ON?
The DVD Recorder is currently in the first
installation mode. Turn on your TV and read
the section, 'First installation', in the chapter
'Installing the DVD Recorder'.
MAX TITLE
The maximum number of titles has been
reached for the disc. Each disc can have a
maximum of 49 titles.
MAX CHAP
The maximum number of chapters per title/
disc has been reached. The maximum number
of chapters per title is 99, and 255 per disc.
SYS MENU
The on-screen menu display is on.
MENU UPDATE
After a successful recording, the list of disc
contents is updated.
NO DISC
No disc has been inserted. If a disc has been
inserted, then it is possible that the disc cannot
be read.
NO SIGNAL
No signal or poor signal strength.
NTSC DISC
A disc with NTSC recordings has been
inserted and an attempt was made to record a
PAL signal. Insert a new disc or use a disc
containing PAL recordings.
OPENING
Disc tray is opening.
PAL DISC
A disc with PAL recordings has been inserted
and an attempt was made to record an NTSC
signal. Insert a new disc or use a disc
containing NTSC recordings.
PHOTO MMM/NNN
Number of the current photo (for Photo
mode). MMM represents the order of the
current photo, NNN represents the total
number of photos in the album. If the number
exceeds 999, '999' will be displayed instead.
POST FORMAT
The disc is being prepared after the menu
structure has been created.
PROTECTED
Disc is copy-protected and cannot be
recorded.
READING
Disc is being recognized by the DVD recorder.
RECORDING
A recording is currently in progress.
SAFE RECORD
The new recording will be added to the end of
all recordings.
INSTALL
After the automatic channel search, the menu
for setting the time/date appears on the
screen.
STANDBY
The DVD recorder has been turned off.
TRAY OPEN
Disc tray is open.
VCD
A VCD has been loaded into the DVD
recorder.
WAIT
Please wait until this message disappears. The
DVD Recorder is busy processing an
operation.
TV DIRECT
Modulator is turned off. The antenna (RF)
signal is now fed to the TV.
Display panel symbols/messages (cont’d)
MRV660_17_Eng40 9/3/05, 10:26 AM67