Filter
Top Products
27
English
3139 246 XXXXX
Selecting the channel input signal
The DVD recorder will detect whether
you connected an Antenna or Cable TV
signal. If you are not receiving the
correct channels, you can use this
function to select the type of connection
you are using and allow the DVD
recorder to reset the channels.
1 Press SYSTEM-MENU.
➜ The system menu appears on the TV.
2 Press 4 repeatedly to select { Set-up .}
3 Press 2 repeatedly to select { Analog
Ch.}
4 Press 4 repeatedly to select
{ Connection } and press 2 to confirm.
5 Press 3 4 to select the connection the
TV is using.
➜ { Auto } : Select this to enable the
DVD recorder to detect the input signal
automatically.
➜ { Cable } : Select this if you have
connected a cable signal.
➜ { Antenna } : Select this if you have
connected an antenna signal.
6 Press OK to confirm.
➜ The TV channel search starts.
Installing the DVD Recorder (cont’d)
TIPS: Press 1 to go back to previous menu item. Press SYSTEM-MENU to exit the menu.
MRV660_17_Eng40 9/3/05, 10:25 AM27