Filter
Top Products
39
English
3139 246 XXXXX
Manual recording
Use the 'Manual recording' function to
start recording immediately (e.g., to
record a TV show already in progress.)
1 Turn on the TV power. Select the correct
Video In channel at the TV.
2 Insert a DVD+R(W).
➜ The contents of this disc is checked.
➜ If a DVD+RW was inserted that
already contains recordings, press 3 4
to select the location where the
recording should be started.
3 Press TUNER on the remote control to
see the TV programs, then press 3 4 to
select the program number you wish to
record.
● To record from external device, press
button {0} on the remote control and
followed by 4 to select the correct input
channel that matches the socket to which
you connected to the DVD recorder.
➜ { CAM 2 } : DV IN socket at the front
➜ { CAM 1 } : S-VIDEO or VIDEO with
AUDIO L/R sockets at the front
➜ { EXT 2 } : IN-EXT2, S-VIDEO (Y/C)
or VIDEO (CVBS) sockets at the back
➜ { EXT 1 } : IN-EXT1, COMPONENT
VIDEO sockets at the back
4 Press RECORD 0 to start recording.
● For DVD+RW disc, to prevent accidental
loss of recordings, hold down the
RECORD 0 until the message ‘SAFE
RECORD’ appears on the display panel.
TIPS: To play a DVD+R on other DVD players, see “Finalizing disc (DVD+R)”.
TIPS: Underlined option is the factory default setting.
Press 1 to go back to previous menu item. Press SYSTEM-MENU to exit the menu.
Recording (cont’d)
Filter mode
For long play or extended play recording,
you can select a suitable filter mode to
optimize the video recording. The setting
does not influence high quality or
standard play recording mode.
1 Press 4 to select { Filter } and press 2
to enter its options.
2 Press 2 to select one of the options.
➜ {
Standard } : Recording quality is as
the recording mode selected.
➜ { Sport } : Improve recording of
images that move quickly. Optimize the
picture quality in record mode M3~M8.
3 Press 1 to confirm.
MRV660_17_Eng40 9/3/05, 10:25 AM39