Mitsubishi Electronics DX-TL950E DVR User Manual


 
23
ENGLISH
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Basic Operations
The menu screen will not be cleared even when
pressing the SET UP button when the setting item
is flashing.
6. Turn the JOG dial to select 0.5P and turn the SHUTTLE
ring clockwise.
Setting is confirmed and flashing stops.
<RECORD SETTING> ALARM CH
NO PPS GRADE A-PPS A-GRADE
0.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
<ESTD REC> D H M
9
7
4
5
6
1
2
3
8
7. Turn the JOG dial clockwise to reverse display GRADE
and turn the SHUTTLE ring clockwise.
The background of the GRADE setting turns red and
flashes.
<RECORD SETTING> ALARM CH
NO PPS GRADE A-PPS A-GRADE
0.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
<ESTD REC> D H M
9
7
4
5
6
1
2
3
8
When the setting item is flashing, the menu
screen cannot be cleared even when pressing the
SET UP button.
8. Turn the JOG dial to select HIGH and turn the SHUTTLE
ring clockwise.
The setting is confirmed and flashing stops.
9
7
4
5
6
1
2
3
8
<RECORD SETTING> ALARM CH
NO PPS GRADE A-PPS A-GRADE
0.5P HIGH 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
<ESTD REC> D H M
9. When the setting is complete, turn the SHUTTLE ring
counterclockwise.
The cursor appears to the camera number on the left.
When continuing with other camera number settings, turn
the JOG dial to move the cursor to the desired camera number
and repeat steps 4 ~ 9 to perform settings.
<RECORD SETTING> ALARM CH
NO PPS GRADE A-PPS A-GRADE
>>
0.5P HIGH 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
2.5P STD 2.5P STD
<ESTD REC> D H M
9
7
4
5
6
1
2
3
8
10. Turn the SHUTTLE ring counterclockwise three times or
press the SET UP button to return to the normal screen.
11. Press the REC/STOP button.
The REC/STOP button turns on and recording starts.
12. To stop recording, press the REC/STOP button for more
than 1 second.
Recording stops and the REC/STOP button turns off.
REC/STOP
Basic playback
This unit allows recorded video to be played back using
various methods. The basic playback described here is the
most common method for playback.
This unit will stop playback when a request for
acquisition of live images is communicated during
playback.
This unit will not playback while a request for the
acquisition of live images is being communicated.
1. Press the PLAY button ( inside the front door) on the front of
the unit.
Recorded contents of the HDD are played back.
After turning the power on, the oldest recorded video is
played back first. Otherwise, playback resumes at the position
of the previous playback.
STOP
PAUSE
REV. PLAY
PLAY
When the HDD REPEAT PLAY setting in the
HDD SETTINGS is set to OFF, playback is
stopped when reaching the end of the physical HDD
or recorded section. When the HDD REPEAT PLAY
setting is set to ON, recorded video data is played
back repeatedly (
see HDD REPEAT PLAY,
page 47).
2-1. (To change HDD or Compact Flash Card playback device
)
Setting ( default : MAIN )
MAIN : Select when playing back MAIN HDD contents.
SUB : Select when playing back SUB HDD contents.
CFC : Select when playing back CFC contents.
When changing the playback device to Compact Flash Card,
press the SEARCH button twice ( see page 67) to display
the <SEARCH SELECTION> screen and select CFC
(Compact Flash Card) in PLAYBACK DEVICE.
SUB is appeared on the screen when
PARTITION is selected on HDD SETTING of the
<INITIALIZATION> screen.
2-2. Press the PLAY button.
Plays from the playback device that has been selected.