Filter
Top Products
59
ENGLISH
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Operations
■ QUICK SETTINGS
Menu settings stored on the Compact Flash Card can
be read and altered with the unit. Menu settings in the
unit can be copied to the Compact Flash Card.
During execution of menu quick settings, other op-
erations are not accepted.
♦ To update menu settings of this unit
To read/alter menu settings stored on the Compact
Flash Card using the unit, synchronize the HDD setting
to that of the unit the menu settings were copied to. The
HDD setting that needs to be synchronized is the “HDD
SETTING”, and “PARTITION SIZE”.
If the HDD settings are not synchronized, the menu
settings are not updated.
1. Insert a Compact Flash Card recorded with menu settings
into the COMPACT FLASH slot of this unit.
2. Select “QUICK SETTINGS” in the <SETTINGS> screen and
turn the SHUTTLE ring clockwise.
• The <QUICK SETTINGS> screen appears.
<QUICK SETTINGS>
>>
LOAD SETTING DATA FROM CFC
SAVE SETTING DATA TO CFC
3. Select “LOAD SETTING DATA FROM CFC” and turn the
SHUTTLE ring clockwise.
• The <SETTING DATA LOADING> screen appears.
• To cancel the update of menu settings, turn the SHUTTLE
ring counterclockwise.
<SETTING DATA LOADING>
>>
EXECUTE
SHUTTLE>>:EXECUTE,<<:BACK
4. Turn the SHUTTLE ring clockwise.
• The menu settings of this unit is updated and
<<COMPLETED>> appears on the screen.
• When no Compact Flash Card has been inserted <<MEDIA
NONE>> will appear on the screen.
Turn off POWER to finalize updated menu settings.
When data with setting changes for any one item
of “IP ADDRESS”, “SUB NET MASK”, “GATEWAY”,
“SERVICE PORT SETTING” on the <ETHERNET>
screen or “IP ADDRESS”, “TARGET” or “OWN” of the
<ALARM NOTIFICATION SETTING> settings are read
out or when settings are changed, restart is performed
after the power has been cut.
After menu read-out has been completed, the time
is not reflected and the correct time should be set.
5. (Finalizing updated menu settings • • • )
Turn the SHUTTLE ring counterclockwise three times, or return
to normal screen by pressing the SET UP button.
6. Press the POWER button to turn the unit off, then press it
once more to turn the unit back on.
• The setting is confirmed.
♦ To save menu settings of this unit to a Compact
Flash Card
1. Insert a Compact Flash Card into the COMPACT FLASH
slot of this unit.
2. Select “QUICK SETTINGS” in the <SETTINGS> screen and
turn the SHUTTLE ring clockwise.
• The <QUICK SETTINGS> screen appears.
3. Select “SAVE SETTING DATA TO CFC” and turn the
SHUTTLE ring clockwise.
• The <SETTING DATA SAVING> screen appears.
• When not saving the menu settings to the Compact Flash
Card, turn the SHUTTLE ring counterclockwise.
<SETTING DATA SAVING>
>>
EXECUTE
SHUTTLE>>:EXECUTE,<<:BACK
4. Turn the SHUTTLE ring clockwise.
• The menu settings are overwritten in the Compact Flash
Card and <<COMPLETED>> appears on the screen.
• When no Compact Flash Card has been inserted <<MEDIA
NONE>> will appear on the screen.
5. Turn the SHUTTLE ring counterclockwise or press the SET
UP button.
Menu read-out, setting change, and menu copying
can be performed only when this unit is stopped (stop
of playback/recording/communication).
For LOAD/SAVE in the menu sometimes it takes a
few seconds immediately after perform “EXECUTE”.
<QUICK SETTINGS>