Mitsubishi Electronics LT-3280 Flat Panel Television User Manual


 
Chapter 1: Product Overview
10
Display Top Control Panel
The buttons on the top control panel of the display are also found on the remote control and media center front panel.
See Remote Control Overview in this chapter for information about how to use these buttons.
Top View of Display
Power Indicator
The media center and display power on and off together
when you press the POWER button on the remote control.
The display POWER indicator is lit during normal operation
of the TV. The indicator is in the lower left corner of the
display, below the screen, as shown in the diagram below.
IR Sensors
The display has two IR sensors, one for ordinary TV
operation and one for “Learning.”
Under normal conditions, point the remote at the
display and the IR signal will reach both sensors.
If using the remote close to the TV, point the remote
control at the sensor you wish to activate. For
ordinary TV operation, point the remote at the
operating sensor.
0QFSBUJOH*3
4FOTPS
i-FBSOJOHw
*34FOTPS
0QFSBUJOH*3
4FOTPS
i-FBSOJOHw
*34FOTPS
Display Power Indicator and IR Sensors
During typical use,
the signal from the
remote reaches
both sensors.
When close to the
TV, aim the remote
at the sensor you
wish to activate.